Smeg DUCO4SS Manuel d'utilisateur télécharger pdf (Page 5)

Instructions for the user

5. ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)

The programmer user instructions are valid only for the large oven.

LIST OF FUNCTIONS

MINUTE-MINDER BUTTON

AUTOMATIC DURATION / AUTOMATIC STAR TIME BUTTON

TIME SETTING AND RESET

DECREASE TIME BUTTON

INCREASE TIME BUTTON

5.1.0 Setting the time

When the oven is used for the first time, or after a power failure, the display flashes on and off at

regular intervals. Press the

key for 1 to 2 seconds to stop the display flashing and start setting of

the current time. Press the

or keys to increase or decrease by one minute each time a key is

pressed.

Press one of the two value modification keys until the current time appears. The clock will start from

the time set 6/7 seconds after the last key is pressed.

At the end of each programmed cooking operation, an intermitant alarm will sound 3 to 4 times at

intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any

key.

5.1.1 Minute-minder

This function does not stop cooking but just triggers the alarm.

- When the

key is pressed the display illuminates, appearing as shown in

figure 1;

- Press the

or keys within 6 to 7 seconds to set the minute-minder.

Whenever a key is pressed, 1 outside segment, representing 1 cooking

minute will light up (figure 2 shows 10 cooking minutes).

- The countdown will start 6 to 7 seconds after the last key is pressed; at the

end of it, you will hear the alarm.

- During cooking with countdown, the current time can be displayed by

pressing the

key once; press again to return to the minute-minder display.

- At the end of the countdown, the oven has to be switched off by hand,

by turning the thermostat and the function selector to 0.

1 2 3 4 5 6 7 8 9 10 ... 24 25

Pas de commentaire

Smeg DUCO4SS Manuel d'utilisateur Page 5