Smeg SDK380X-5 Manuel d'utilisateur télécharger pdf (Page 16)

Instructions for the user

Cooking start: as well as setting a cooking duration time, the user can

also set the cooking start time (up to 12 hours after the current time). To

set the cooking start/end time, proceed as follows.

Set the cooking duration time as described in the previous point.

Within 6/7 seconds after the last time the or keys are pressed,

press the

key to set the cooking start time. The display will show

the current time with the inside segments indicating the cooking end

time illuminated. Use the

and keys to set the cooking start time.

6/7 seconds after the last time a key is pressed, the display will show

the current time and the cooking start and end times, indicated by the

illuminated inside segments. The segments on the display will be

constantly on until the current time is the same as the cooking start

time; as soon as the current time reaches the cooking start time set,

all the inside segments will start to flash, indicating that the oven has

started cooking.

When the end of the cooking time is reached, the timer will switch off

the oven heating elements, the beeps will start and the numbers on

the dial will flash.

To reset the entire program set, keep the central key pressed for 1

or 2 seconds: if cooking has already started the oven will have to be

switched off by hand.

The image on the right shows an example of

programming: the current time is 7.06 and

cooking is programmed to start at 8 o'clock and

finish at 9.

At 8 o'clock, the inside segments between 8 and

9 will start to flash and the hour pointer will

remain still.

Caution: for the oven to start cooking after the programming procedure

just described, the thermostat and function selector must be properly set

on the temperature and function required.

127

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Pas de commentaire

Smeg SDK380X-5 Manuel d'utilisateur Page 16