Smeg A4BL-8 Manuel de service télécharger pdf (Page 37)

Instructions for the user

9.8 Cleaning the door seal

To keep the seal clean, use a non-abrasive sponge and lukewarm water. The

seal should be soft and flexible (with the exception of pyrolitic models).

In pyrolitic models, the seal may flatten over time and lose its original shape. To

restore it, pinch the seal all the way along. This also helps remove any dirt on

the seal.

9.9 Cleaning self-cleaning panels (catalysis cycle)

If the self-cleaning panels are dirty, primarily with small amounts of grease, a

heating cycle can be executed to regenerate them.

Clean the base and the roof liner first with a microfibre cloth soaked in water and

neutral washing up liquid, then rinse thoroughly.

Set a regeneration cycle by selecting a fan-assisted function at the maximum

temperature for one hour.

If the panels are particularly dirty, after the regeneration cycle, remove them

and wash them with neutral washing up liquid. Then rinse and dry them.

Put the panels back in the oven and set a fan-assited function at a temperature

of 180°C for one hour, in order to ensure that they are thoroughly dry.

We recommend carrying out the self-cleaning panel regeneration cycle every 15

days.

The panel regeneration cycle is a cleaning method suitable for grease residues,

not sugar-based ones.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

Smeg A4BL-8 Manuel de service Page 37