Smeg TRU90BL Manuel d'instructions télécharger pdf (Page 18)

Installation

20

Assembling the backguard

The backguard must always be positioned

and secured correctly on the appliance.

1. Loosen the 6 screws on the back of the

top (A) and unscrew the 2 screws (B) on

the side part of the backguard.

2. Place the backguard on the top. Align

the 6 bottom slots of the backguard with

the 6 screws on the back of the top that

were previously loosened.

3. Tighten the 6 screws on the back of the

hob (A) and tighten the 2 screws under

the top (B) to secure the backguard.

Mounting the kick platet

The kick plate must always be positioned

and secured correctly on the appliance.

1. Place the kick plate in the front bottom

part of the appliance.

2. Place the kick plate in the front bottom

part of the appliance.

3. Screw the four side screws to fasten the

kick plate to the appliance.

4. Cover the holes of the kick plate with the

plugs provided.

The backguard provided is an

integral part of the product; it must

be fastened to the appliance prior

to installation.

The kick plate provided is an

integral part of the product; it must

be fastened to the appliance prior

to installation.

1 2 ... 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire