Smeg SY92IPBL8 Manuel de service télécharger pdf (Page 13)

Instructions for the user

6.6 Power levels

The power in the cooking zone can be adjusted to various levels. The table shows the levels suitable for

various types of cooking.

Power level Suitable for

0 OFF position

U Dishwarming

1-2 Cooking small amounts of food (minimum power)

3-4 Cooking

5-6

Cooking large quantities of food, roasting larger

portions

7-8 Roasting, slow frying with flour

9 Roasting

P* Roasting / browning, cooking (maximum power)

*See booster function.

6.7 Saucepan recognition

If there is no saucepan on a cooking zone or if the saucepan is too small, no energy will be transmitted

and the symbol will appear on the display.

If there is a suitable saucepan on the cooking zone, the recognition system notices it and turns on the

hob to the power level set using the knob. Energy transmission is also interrupted when the saucepan is

removed from the cooking zone (the symbol will appear on the display). If the saucepan recognition

function is activated in spite of the saucepan or frying pan on the cooking zone being smaller than the

zone itself, only the necessary energy will be transmitted.

Saucepan recognition limits: The minimum diameter of the saucepan base is indicated by a circle

inside the cooking zone. Pans with smaller diameters risk not being detected and therefore not activating

the inductor.

6.8 Residual heat

If the cooking zone is still hot after being switched off, the symbol will appear on the display. The

symbol clears once the temperature drops below 60°C.

Supervise children carefully as they cannot readily see the indication of residual heat. The cooking

zones remain hot for a certain period of time even after they have been turned off. Make sure that

children never touch the hob.

6.9 Heating accelerator

Each cooking zone is equipped with a heating accelerator that allows to supply the maximum power for

a time that is proportional to the selected power.

Turn the knob to the left to the “A” position and then release; the symbol appears on the display.

Select the required heating power (1..8) within 3 seconds. The selected power and symbol will

flash alter nately on the display.

The power level can be increased at any moment, the “maximum power” per iod will automatically be

modified.

If the power is reduced, turning the knob anti-clockwise, the heating accelerator will automatically be

disabled.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Smeg SY92IPBL8 Manuel de service Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers Smeg SY92IPBL8