Smeg TR4110IBL Manuel d'utilisateur télécharger pdf (Page 34)

Installation

74

5 Installation

5.1 Electrical connection

General information

Check that the mains electricity supply

matches the characteristics indicated on the

identification plate.

The identification plate bearing the

technical data, serial number and brand

name is visibly positioned on the appliance.

Do not remove the identification plate for

any reason.

Perform the ground connection using a wire

that is 20 mm longer than the other wires.

The appliance can work in the following

modes:

• 220-240 V 1N~

Use a 3 x 10 mm² three-core cable.

• 380-415 V 2N~

Use a 4 x 4 mm² four-core cable.

• 380-415 V 3N~

Use a 5 x 2.5 mm² five-core cable.

.

Power voltage

Danger of electrocution

• Have the electrical connection

performed by authorised technical

personnel.

• Use personal protective equipment.

• The appliance must be connected to

ground in compliance with electrical

system safety standards.

• Disconnect the main power supply.

• Do not pull the cable to remove the

plug.

• Use H05V2V2-F cables withstanding a

temperature of at least 90°C.

• The tightening torque of the screws of

the terminal supply wires must be 1.5 - 2

Nm.

The values indicated above refer

to the cross-section of the internal

conductor.

The aforementioned power cables

are sized taking into account the

coincidence factor (in compliance

with standard EN 60335-2-6).

1 2 ... 29 30 31 32 33 34 35 36 37 38

Commentaires sur ces manuels

Pas de commentaire