Smeg UKS3F092P Manuel d'utilisateur télécharger pdf (Page 12)

The appliance is supplied with a 13 amp

fuse (B). In the event of having to change

the fuse in the plug supplied, a 13 amp

ASTA approved (BS 1362) fuse must be

used.

WARNING! A cut off plug

inserted into a 13 amp socket is

a serious safety (shock) hazard.

Ensure that it is disposed of

safely.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

5 cm

min.

200 cm

2

min.

200 cm

2

CAUTION! Refer to the

assembly instructions for the

installation.

Door reversibility

The door of the appliance opens to the

right. If you want to open the door to the

left, follow these steps before you install the

appliance:

1. Loosen and remove the upper pin.

2.

Remove the door.

3. Remove the spacer.

4. With a key, loosen the lower pin.

5.

Tighten the lower pin on the opposite

side.

6. Install the spacer.

7. Install the door.

8. Tighten the upper pin.

Installing the appliance

CAUTION! Make sure that the

mains cable can move freely.

1. If necessary cut the adhesive sealing

strip and then apply it to the appliance

as shown in figure.

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire