Smeg UKC7172NP Manuel d'utilisateur télécharger pdf (Page 13)

symbol or coloured green and

yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter

“N“ or coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or

coloured red.

4. Check that no cut, or stray strands of

wire is present and the cord clamp (E) is

secure over the outer sheath.

Make sure the electricity supply voltage

is the same as that indicated on the

appliance rating plate.

5.

Switch on the appliance.

The appliance is supplied with a 13 amp

fuse (B). In the event of having to change

the fuse in the plug supplied, a 13 amp

ASTA approved (BS 1362) fuse must be

used.

WARNING! A cut off plug

inserted into a 13 amp socket is

a serious safety (shock) hazard.

Ensure that it is disposed of

safely.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

5 cm

min.

200 cm

2

min.

200 cm

2

CAUTION! Refer to the

assembly instructions for the

installation.

Door reversibility

1. Loosen and remove the upper pin and

the spacer.

2. Remove the upper door.

3.

Loosen the middle hinge.

4. Remove the door.

5. Remove the lower spacer.

6. Loosen the lower pin with a key.

7. Tighten the lower pin on the opposite

side.

8. Install the lower spacer.

9. Install the door.

10. Tighten the spacer and the upper pin.

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Commentaires sur ces manuels

Pas de commentaire