Smeg SF140 Manuel d'utilisateur télécharger pdf (Page 47)

Cleaning and maintenance

101

EN

Setting of programmed pyrolytic cycle

It is possible to program the pyrolytic cycle

start time like all other cooking functions.

6. After selecting the pyrolytic cycle

duration, press the symbol and

select “function delayed”.

7. Select the time for the pyrolytic to finish.

8. The appliance waits for the set start time.

During the pyrolytic cycle the fans

produce a more intense level of

noise due to a greater rotation

speed. This is an absolutely normal

operation, intended to provide

more effective heat dispersal. At

the end of the pyrolytic cycle, the

fans will continue to operate for

long enough to avoid overheating

the walls of adjacent units and the

front of the oven.

If the pyrolytic cycle gives

unsatisfactory results at minimum

duration, it is recommended to set

a longer time for successive

cleaning cycles.

It is not possible to select any

function once the door lock device

has been activated. It remains

possible, however, to switch off the

appliance using the specific

controls.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Commentaires sur ces manuels

Pas de commentaire