Smeg CD7276NLD2P1 Manuel d'utilisateur télécharger pdf (Page 14)

Problem Possible cause Solution

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp does not work. The lamp is defective. Contact the nearest Author‐

ised Service Centre.

The compressor operates

continually.

Temperature is set incor‐

rectly.

Refer to "Operation".

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor‐

ing.

The door is not closed cor‐

rectly.

Refer to "Closing the door".

The FastFreeze is switch‐

ed on.

Refer to "FastFreeze function".

The Shopping is switched

on.

Refer to "Shopping function".

There is too much frost and

ice.

The door is not closed cor‐

rectly or the gasket is de‐

formed/dirty.

Refer to "Closing the door".

The compressor does not

start immediately after

pressing the FastFreeze, or

after changing the tempera‐

ture.

This is normal, no error

has occurred.

The compressor starts after a

period of time.

The compressor does not

start immediately after

pressing the Shopping, or

after changing the tempera‐

ture.

This is normal, no error

has occurred.

The compressor starts after a

period of time.

Water flows on the rear

plate of the refrigerator.

During the automatic de‐

frosting process, frost

melts on the rear plate.

This is correct.

Water flows inside the refrig‐

erator.

The water outlet is clog‐

ged.

Clean the water outlet.

Food products prevent

that water flows into the

water collector.

Make sure that food products

do not touch the rear plate.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Smeg CD7276NLD2P1 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Smeg CD7276NLD2P1