Smeg C3170PL Manuel d'utilisateur télécharger pdf (Page 25)

If the advice does not lead to

the desired result, contact the

nearest Authorised Service

Centre.

Replacing the lamp

CAUTION! Disconnect the plug

from the mains socket.

1. Pull the left side of the lamp cover with

your fingers to unlock it. Remove the

cover by pulling it towards yourself.

1

2

1

2. Replace the lamp with one of the same

power and shape, specifically designed

for household appliances. The

maximum power is shown on the light

bulb cover.

3. Install the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door.

Make sure that the light switches on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

assembly instructions.

3.

If necessary, replace the defective door

gaskets. Contact the Authorised

Service Centre.

INSTALLATION

Location

Refer to the assembly

instructions for the installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

Positioning

Install the appliance in a dry, well ventilated

indoors where the ambient temperature

corresponds to the climate class indicated

on the rating plate of the appliance.

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

Cli-

mate

class

Ambient temperature

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation

can only be guaranteed within

the specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer service

or to the nearest Authorised

Service Centre.

25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 55 56

Commentaires sur ces manuels

Pas de commentaire