Smeg S7220FND2P Manuel d'utilisateur télécharger pdf (Page 27)

Problem Possible cause Solution

The food products' tem-

perature is too high.

Let the food products tempera-

ture decrease to room temper-

ature before storage.

The door has been opened

often.

Open the door only if necessa-

ry.

The FastFreeze function is

switched on.

Refer to "FastFreeze function".

There is no cold air circula-

tion in the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead to

the desired result, contact the

nearest Authorised Service

Centre.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised

Service Centre.

INSTALLATION

Positioning

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Cli-

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation

can only be guaranteed within

the specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer service

or to the nearest Authorised

Service Centre.

Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your domestic

power supply.

• The appliance must be earthed. The

power supply cable plug is provided with

a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Commentaires sur ces manuels

Pas de commentaire