Smeg ZAS7F174NP Manuel d'utilisateur télécharger pdf (Page 12)

Problem Possible cause Solution

The compressor does not

start immediately after

pressing the "FastFreeze",

or after changing the tem‐

perature.

This is normal, no error

has occurred.

The compressor starts after a

period of time.

Temperature cannot be set. The "FastFreeze function"

is switched on.

Switch off "FastFreeze func‐

tion" manually, or wait until the

resets automatically to set the

temperature. Refer to "Fast‐

Freeze function".

dEMo appears on the dis‐

play.

The appliance is in dem‐

onstration mode.

Keep the OK pressed for ap‐

proximately 10 seconds until a

long sound is heard and dis‐

play shuts off for a short time.

The temperature in the ap‐

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera‐

ture.

The food products' tem‐

perature is too high.

Let the food products temper‐

ature decrease to room tem‐

perature before storage.

The door has been

opened often.

Open the door only if necessa‐

ry.

The "FastFreeze function"

is switched on.

Refer to "FastFreeze function".

There is no cold air circu‐

lation in the appliance.

Make sure that there is cold

air circulation in the appliance.

If the advice does not lead to

the desired result, contact the

nearest Authorised Service

Centre.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

assembly instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

TECHNICAL DATA

Dimensions of the recess

Height mm 1780

Width mm 560

12

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire